Room Lab공간 실험실
한국어English

Plan your room to scale

Enter the room's width and length, then drag the furniture around. Anything that collides gets a red outline, and a blue band traces the way from the door to the back of the room, if there is one.

Floor plan Autosaved

Room area
10.50㎡
Rectangle
Furniture
4.13㎡
3 items
60 cm route
Checking
Door to back wall

Working out the layout…

Tap a piece of furniture on the plan to edit its position and size here.

Dragging snaps to 5 cm. With a piece selected, arrow keys move it 5 cm, or 1 cm with Shift held down.

Why is something outlined in red?

It overlaps another piece or sticks out through a wall. Height isn't considered, so a chair tucked under a desk counts as an overlap too.

How accurate is the route check?

It works on a 10 cm grid, so it can be a little stricter than real life. The 60 cm route note goes into the details.

Where is my layout saved?

Only in this browser's storage. To open it on another device, use "Copy link". The measurements are packed into the link itself.

Layout notes

Layouts I drew, tested and fixed

Every room size and furniture coordinate is written down. Each note explains what went wrong and how it was fixed, and every layout opens in the planner with one click.

  1. 01Will a queen bed and a desk fit in a 3 × 3.5 m bedroom?Bedrooms300×350 · 10.50 m²5 min
  2. 02Four small-bedroom layout mistakes, all in one 2.7 × 3 m planSmall rooms270×300 · 8.10 m²5 min
  3. 03105 cm or 120 cm desk: how to choose for a small roomDesks310×300 · 9.30 m²5 min
  4. 04How much space to leave in front of a wardrobe, by door typeStorage300×300 · 9.00 m²6 min
  5. 05Re-planning a 14.4 m² studio, one step at a timeStudios360×400 · 14.40 m²6 min

All eight notes

How to use it

All you need is a tape measure

With the room measured, your first plan takes about five minutes.

  1. 1

    Measure the room

    Enter the floor length between walls in centimeters. If there are baseboards, measure from the face of one to the face of the other.

  2. 2

    Place the furniture

    Pick from the list and drag pieces into position. Change the sizes to the outside dimensions of what you're buying, not the mattress size.

  3. 3

    Check, then save

    A red outline means two things overlap. The status bar tells you whether a path runs from the door to the back of the room. Happy with it? Save a PNG or copy a link.